Gaseous slip flow forced convection through ordered microcylinders

Abstract

This is a theoretical study dealing with longitudinal gaseous slip flow forced convection between a periodic bunch of microcylinders arranged in regular array. The selected geometry has applications in microscale pin fin heat sinks used for cooling of microchips. The flow is considered to be hydrodynamically and thermally fully developed. The two axially constant heat flux boundary conditions of H1 and H2 are considered in the analysis. The velocity and temperature discontinuities at the boundary are incorporated into the solutions using the first order slip boundary conditions. The method considered is mainly analytical in which the governing equations and three of the boundary conditions are exactly satisfied. The remaining symmetry condition on the right-hand boundary of the typical element is applied to the solution through the point matching technique. The results show that both the Poiseuille number and the Nusselt number are decreasing functions of the degree of rarefaction characterized by the Knudsen number. While an increase in the blockage ratio leads to a higher Poiseuille number, the functionality of the Nusselt number on this parameter is not monotonic. At small and moderate values of the blockage ratio, the Nusselt number is higher for a higher blockage ratio, whereas the opposite may be right for higher values of this parameter. It is also observed that the angular variations of the parameters are reduced at smaller blockage ratios. Accordingly, the H1 and H2 Nusselt numbers are the same for small and moderate blockage ratios.