Abstract
A laboratory-scale study was set up to investigate ammonia (NH 3), nitrous oxide (N 2O), carbon dioxide (CO 2) and methane (CH 4) emissions during storage of untreated pig and cattle slurry and the fractions (solid and liquid) obtained by mechanical separation. The solid and liquid fractions were obtained from the same untreated slurry by means of a lab-scale mechanical separator. The manures were stored for a period of 30 days in open vessels (1500 cm 3 capacity) in two temperature-controlled rooms, which were kept at 5±0.5 and 25±0.2 °C. Gaseous emissions were determined using a dynamic chamber method and infrared photoacoustic detection (IPD). Over the storage period, gaseous emissions from pig manures were significantly ( P<0.05) higher than those from cattle manures. N 2O fluxes of up to 232 mg m −2 h −1 were measured, but from pig solid fraction only. Between 40.8% (from pig liquid fraction stored at 25 °C) and 3.60% (from untreated cattle slurry stored at 25 °C) of the initial nitrogen content of the manures was lost as NH 3. Over the 30-day-storage period, the predominant emission of carbon was in the CO 2 form. Total C-CH 4 losses, expressed as a percent of the carbon initially present in the volatile solids (C-VS), ranged from 0.60% to 12.8% for pig manures and from 0.23% to 1.56% for cattle manures. The mechanical separation of cattle slurry increased by up to 30% the emissions of CO 2 equivalents to the atmosphere, during the storage of the separated fractions, when compared with the slurries. Results indicated that NH 3, N 2O, CO 2 and CH 4 emissions were affected by the interaction between a number of variables, including storage temperature, chemical characteristics and type of manure. Results also indicated that mechanical separation does not reduce emissions, but has the potential to increase the emissions of CO 2 equivalents to the atmosphere during the storage of the separated fractions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.