Year-end Sale % OFF 
Abstract
In this paper, the effect of feeding gas type on the dynamics of channel spark pulsed electron deposition system is investigated. Electrical, magnetic, and optical characterisations of the system were measured for different feeding gases, oxygen (O2), nitrogen (N2), and argon (Ar). The discharge current for each gas type was measured with maximum value of 1189 A for O2 at -13 kV applied voltage. The discharge current and voltage waveforms were simulated by LRC circuit theory. Effect of gas pressure on the maximum discharge current and total inductance was also investigated. The beam current investigated by faraday cup and reached maximum electron beam current of 136 A for O2 gas. Two magnetic pickup coils were employed for the measurements of beam kinetic dynamics and the measured beam speed was around 0.4× 106 m/sec. Electron beam plasma density was calculated from faraday cup and magnetic coils signals and found to be 1.96×1020 m-3. Optical emission spectra were also measured to identify reactive species and its role in electron beam interaction with graphite target for thin film deposition application. The ability of using the system for thin film deposition is demonstrated by depositing amorphous hydrogenated carbon (a-C:H) films over silicon substrates.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
