Abstract
Carbon dioxide (CO2) plasticization and sorption effects in both thick and thin films of “high free-volume” glassy perfluoropolymers were studied by monitoring CO2 permeability and by observing changes in the film thickness and refractive index with ellipsometry measurements. The film thickness, aging time, thermal history and CO2 exposure protocols have significant effect on the absolute CO2 permeability and plasticization behavior of both thick and thin films. The extent of CO2 plasticization increases as film thickness decreases and as the aging time is increased. The as-cast films showed higher plasticization compared to films which were annealed above Tg; however, the CO2 permeability of both the as-cast and annealed films continuously decreased during the depressurization step unlike other glassy polymers. In general, the various CO2 exposure protocols revealed lower CO2 plasticization for perfluoropolymers compared to other reported glassy polymers. The extent of CO2 sorption obtained from the ellipsometry measurements was found to decrease with the decrease in the excess volume and increase in the aging time for perfluoropolymers; in addition, the structural differences among the various glassy polymers resulting in different polymer–gas interactions also affects the overall sorption characteristics. The lower plasticization in perfluoropolymers compared to Matrimid was also confirmed from the smaller percent increase observed for the experimental diffusion coefficient compared to the theoretically predicted diffusion coefficient from the dual sorption-mobility model. The Langmuir sorption parameter, CH′, and solubility at infinite dilution, S0, obtained from fitting dual sorption-mobility model to sorption data, showed an excellent linear correlation with (Tg-35) °C. The CO2 diffusivity and permeability data obtained for thin films of various glassy polymers also showed a strong correlation with free volume. The somewhat unusual behavior of thin films of AF 2400 in comparison to other glassy polymers studied to date is believed to be related to the low cohesive energy density expected of perfluorinated structures and its high free volume resulting from the bulky dioxole comonomer.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
