Abstract
ABSTRACTStretched thin films composed of a thermoplastic elastomer, a polystyrene‐block‐poly(ethylene butylene)‐block‐polystyrene triblock copolymer (SEBS), and polyolefins, poly(ethylene‐co‐ethylacrylate) and poly(ethylene‐co‐propylene), were obtained by blow‐molding, uniaxial stretching, and cooling to room temperature and the gas permeability of the stretched films was investigated. When the as‐blown annealed film was subjected to uniaxial stretching in the machine direction, PO2 and PN2 increased with an increase in the stretching ratio K and approached a constant value at high stretching ratios. In addition, PO2/PN2 decreased gradually with K and approached a value of 2.95–3.0. The reason for this unique gas permeation behavior is that the molecular mobility of poly(ethylene butylene) chains in a direction normal to the film increases and reaches an equilibrium state at around K = 4.5. The change in gas permeability of the stretched films can be explained using a deformation model for the SEBS matrix. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 39386.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
