Abstract
A radial flow between two parallel disk shape plates, which simulates a flow in the disk shape planar-type solid oxide fuel cell (SOFC), was experimentally investigated. A temperature distribution in the planar-type SOFC is strongly affected by the gas flow behavior, and hence we tried to clarify flow pattern at various flowrates by using particle image velocimetry (PIV). It was found that optimum flow condition in the fuel channel was attained in the case of the Reynolds number of about 5. For this operating condition, a flow field near the anode surface shows uniform velocity distribution. On the other hand, in the upper air channel, non-uniform flow distribution was enlarged and large-scale vortex appears with increase of flow rate. In the lower air channel, local high velocity region exists at a high flow rate. For the present disk channel the optimum flow field in the air channel was obtained around the Reynolds number of 30. These results suggest the necessity of improvement of the channel shape and injection method of air.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
