Abstract
The development of compact accelerator machines is leading towards the use of plasma-based devices that are able to sustain large acceleration gradients up to several tens of GV m−1. The main issue, in this regard, is due to the necessity to produce the plasma shot-by-shot starting from neutral gases, since its lifetime is limited to a few tens of microseconds. This puts severe limitations on its resulting uniformity, stability and reproducibility, which in turn strongly affects the quality of accelerated beams by plasmas. In this work, we describe a gas-filled discharge-capillary where the plasma generation, achieved by ionizing Hydrogen gas with a high-voltage electrical discharge, is stabilized by triggering its ignition with an external laser pulse. Results show a noticeable stabilization of the resulting plasma density along the capillary and the discharge pulse. This enables the development of very long capillaries and in turn, acceleration lengths as required, for instance, by next-generation plasma-based facilities delivering beams in the GeV-scale.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.