Abstract
Dual-tip conductivity probes and a high-speed camera were used to study the gas distribution characteristics in a cold model apparatus of the slender particle-containing scrubbing–cooling chamber. The three-dimension column was 200mm in internal diameter and 1353mm in height. The effects of superficial gas velocities, fiber volume fractions and fiber aspect ratios on global gas holdups were determined. The results showed that under the influence of reverse buoyancy and negative pressure gradients, plume gas flow went up along the outside of the downcomer in downcomer spout region. Local radial gas holdup which was closely related with the internals and flow patterns presented obviously proximate core peak distribution in bubble-breaking plate region. The foam region consisted of bubble coalescence and breakup as well as droplets formation and splashing. At higher gas velocities, the increasing rate of global gas holdup gradually reduced. With the increase of fiber volume fraction, global gas holdup slightly increased at low gas velocities due to suppressed bed turbulence and bubble loading, but decreased at high velocities for increased liquid viscosity and vortex-shedding. Due to suppressed small-scale velocity fluctuation, global gas holdup increased with increased fiber aspect ratio. A modified drift-flux model containing crowding factor and fiber number density for global gas holdup correlations was proposed and all of the data could be calculated with a relative deviation less than 10%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.