Gas crossflow between coal and sandstone with fused interface: Experiments and modeling

Abstract

Multi-layered CBM (Coalbed Methane) reservoirs contain dozens (20–40) of thin coal seams (0.5 m–10 m) and sandstone seams and a commingled production strategy is preferred. Gas crossflow between coal seams and sandstone seams contributes much to the commingled gas production. Our study is focused on gas crossflow between coal and sandstone with fused interface. The experimental apparatus designed for this study consisted of a sandstone sample holder and a coal sample holder, where nitrogen was injected at a constant pressure difference between the sandstone and coal. The gas crossflow rate between coal and sandstone was monitored. Factors including confining stress, effective horizontal stress, axial stress and the permeability of sandstone influencing the gas crossflow were analyzed based on the experimental results. Based on the interface characteristics, a crossflow model for fused interface between coal and sandstone was proposed and gas crossflow resistant coefficients were defined. The experimental results show that gas crossflow rates decreased dramatically with the increment of confining stresses loading on the coal sample and increased linearly with the increment of average pore pressure on the condition of constant effective horizontal stresses. Compared with stresses loading on sandstone samples, the axial stresses and confining stresses loading on coal make larger influence on the gas crossflow rates. With the increment of the sandstone permeability, gas crossflow rates become less sensitive to the change of sandstone permeability. The comparison between model results and experimental results demonstrate that the proposed mathematical models can effectively predict gas crossflow between coal and sandstone with fused interface.