Gas Chromatographic Determination of Ametryn and Its Metabolites in Tropical Root Crops

Abstract

Residue analysis of the herbicide ametryn (2-methylthio-4-ethylamino-6-isopropylamino-s-triazine) is widely known but an analytical method for determining its metabolites has not yet been reported in the literature. A method has been developed for the extraction and determination of ametryn and 3 metabolites, 2-methylthio-4-amino-6-isopropylamino-s-triazine (GS-11354), 2-methylthio-4,6-diamino-s-triazine (GS-26831), and 2-methylthio-4-amino-6-ethylamino-s-triazine (GS-11355) in taniers , yams , cassava. Residues were extracted from crops with ethyl acetate-toluene (3 + 1 v/v), using a Polytron homogenizer and anhydrous sodium sulfate added for drying. The extracts were cleaned up by automated gel permeation chromatography on Bio-Beads SX-3 gel in the same solvent system. Quantitative determination was performed by gas chromatographic (GC) analysis on a column packed with 5% DEGS -PS on 100-120 mesh Supelcoport using either an N-P detector or a flame photometric detector ( FPD ) in the sulfur mode. Minimum detection by the flame photometric detector is 10 ng each for ametryn , GS-11354, and GS-11355 and 21 ng for GS-26831; by the N-P detector, 0.3 ng of each component gives easily quantitatable peaks. On a parts per million basis, starting with 25 g sample, the FPD detected a minimum level of 0.04 microgram/g each for ametryn , GS-11354, and GS-11355, and 0.08 microgram/g for GS-26831. The N-P detector could detect 0.0024 microgram/g for all 4 compounds. In addition to superior sensitivity, instrumental conditions allowed the complete separation of components in 10 min, for the N-P detector; more than 30 min was required for the FPD . Recoveries from fortified crops ranged from 67 to 111% at levels of 0.1-1.0 microgram/g.