Abstract

In this work, a simulation analysis and calibration are carried out to improve the performance of AlGaN/GaN- MOSHEMTs (Metal-Oxide Semiconductor High Electron Mobility Transistors). The effect of the AlGaN layer thickness, gate length, Al mole fraction, and the interface traps on the electrical performance of the device has been presented. Device simulations have been done using Sentaurus technology computer-aided design (TCAD). The simulations and analysis show better drain current, transconductance, and cut-off frequency performance. The maximum cut-off frequency shown by the proposed HEMT device is 45.7 GHz at 100-nm gate length. Good transcoductance has been obtained by scaling down the gate length of the device, which is ascribed to the present two-dimensional electron gas (2DEG) density that supports upgrading the output current. Higher drain current is achieved without using acceptor-like traps in the Al2O3/AlGaN interface. Results show that the Al2O3/AlGaN/GaN-based MOSHEMT is a promising device for high-frequency and power electronic applications.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.