Abstract

In this paper, a simple design of dual-band microstrip patch antenna with complementary split ring resonator (CSRR) and rectangular slots are presented with Superstrate. Highly effective and a simple dual band antenna response can be obtained by placing a single CSRR unit cell on the patch of the conventional microstrip patch antenna along with the etching of two rectangular slots. The proposed Antenna has good performance at both the frequencies. The conventional patch initially deigned to operate at 10 GHz is tuned to operate at two resonant frequencies at 9.56 GHz and 19.48 GHz, which can be significantly useful for wireless applications. And the realized gain obtained at 9.56 GHz and 19.48 GHz using high frequency structure simulator (HFSS – 15) simulations are 6.09 dB and 8.49 dB. In this paper CSRR along with two rectangular slots are responsible for second band and superstrate is responsible for enhancing the gain of the antenna. The metamaterial superstrate layer consists of (5 × 5) array of split ring resonators placed on the top of the substrate. The negative effective permeability is due to the nresence of snlit ring resonators.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.