Abstract
A gain-clamped short wavelength band erbium-doped fiber amplifier (S-band EDFA) is demonstrated utilizing a fiber Bragg grating (FBG). The amplification in S-band is achieved using an erbium-doped fiber (EDF) with depressed cladding design, which suppressed amplified spontaneous emission (ASE) at longer wavelength. The gain clamping is achieved by routing back the forward ASE into the feedback loop as to create a ring laser. The clamped gain is controlled using a variable optical attenuator (VOA) as to generate a gain of 14.6 to 25.2dB for input signal at 1504nm. At VOA = 0dB, the gain is clamped at 14.6dB with a gain variation of less than ±0.5dB for input signal at 1504nm with power dynamic range of -40 to -5dBm. The noise figure penalty is less than 0.8dB in this amplifier since the laser is arranged to be co-propagated with the signal.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
