Abstract
Experimental and theoretical study was made of injection lasers based on InAs/GaAs quantum dots (QDs) formed by the activated alloy phase separation and emitting at about 1.3 /spl mu/m. Electroluminescence and gain spectra were investigated. The maximum modal gain is measured experimentally using two different techniques. Threshold current densities as low as 22 A cm/sup -2/ per QD sheet were achieved. A step-like switch from ground- to excited-state transition lasing was observed with an increasing cavity loss. The characteristic temperatures for a sample with four cleaved sides and a 2-mm long stripe device at 300 K were 140 and 83 K, respectively. Single lateral-mode continuous-wave (CW) operation with the maximum output power of 210 mW was realized. Threshold characteristics of a laser were simulated taking into account radiative recombination in QDs, the wetting layer, and the optical confinement layer. The dependence of the threshold current density on the cavity length was shown to be extremely sensitive to the QD-array parameters determining the maximum gain for ground- and excited-state transitions and to the waveguide design. Our analysis reveals that nonradiative recombination channels may play an important role in the laser operation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
