Abstract
A piezoelectric linear ultrasonic microactuator with a cylindrical stator structure using electroformed Ni pipe is proposed. The length and diameter of the microactuator are about 8.2 and 2.0 mm, respectively. The stator consists of two piezoelectric ceramic (PZT) tubes connected by a 25 1.tm thick electroformed Ni pipe. Traveling wave propagation is generated on the electroformed Ni pipe in finite element method (FEM) simulations. In the experiment, the traveling wave propagation was observed by a laser Doppler vibrometer (LDV) system at the driving frequency of 701 kHz. Bi-directional motion of the slider was observed at the frequency of around 701 kHz and applied voltage V1 of 10 40 V_p-p. At this condition, the maximum output force and maximum velocity were about 0.6 mN at V_1 = 30 Vp_p and 27.3 mm/s at V_1 = 40 V_p-p, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Proceedings of Mechanical Engineering Congress, Japan
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
