Abstract
Gap width is an important factor that affects material removal rate, surface finish, and machining stability in electrical discharge machining processes. This research is to develop a novel control method for a new hybrid positioning system which consists of a linear motor and a piezoelectric actuator for high-efficiency electrical discharge machining processes. In the new system, the linear motor provides the macro feeding while the piezoelectric actuator feeds the workpiece in micro scale at high frequency. To reduce the delay caused by separate movements of the linear motor and piezoelectric actuator, a new control algorithm was developed to synchronize the movements of the motor and piezoelectric actuator. A fuzzy control system was used to control the feeding process. Piezoelectric actuator position and its speed were selected as the fuzzy inputs, while the fuzzy output was the linear motor speed. Cutting experiments were conducted, and results show that the fuzzy system is more powerful than the conventional algorithm and the new algorithm with constant motor speed. An increase in material removal rate of 1.6 times was achieved using the proposed fuzzy control algorithm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
