Fused‐Ring Electron Acceptor ITIC‐Th: A Novel Stabilizer for Halide Perovskite Precursor Solution

Abstract

AbstractSolution‐processed perovskite solar cells have great potential for low‐cost roll‐to‐roll fabrication. However, the degradation of aged precursor solutions will become a critical obstacle to mass production. In this report, a small molecule (ITIC‐Th) is employed to stabilize the perovskite precursor solution containing mixed cations and halides. It is found that ITIC‐Th can effectively suppress the formation of yellow δ‐phase in the films made from aged precursor solutions. Consequently, the devices fabricated from the aged precursor solution with ITIC‐Th experience much less efficiency drop with the increase of the precursor aging time—from 19.20% (fresh) to 16.55% (39 d), compared with the devices made from conventional precursor solutions dropping from 18.07% (fresh) to 1.76% (39 d). The characterizations suggest that ITIC‐Th is beneficial for CH3NH3+ cations to be incorporated into the crystal structure, facilitating the formation of perovskite phase. Furthermore, the presence of ITIC‐Th in the perovskite thin film gives rise to additional photocurrent as well as improved fill factor due to the well‐matched energy levels, the passivation of defects, and the complementary absorption spectra, suggesting a new route toward future high‐efficiency solar cells—incorporating organic non‐fullerene acceptors and halide perovskite materials into the same active layer.