Abstract
Fungal mycelium is an emerging bio-based material. Here, mycelium films are produced from liquid shaken cultures that have a Young’s modulus of 0.47 GPa, an ultimate tensile strength of 5.0 MPa and a strain at failure of 1.5%. Treating the mycelial films with 0–32% glycerol impacts the material properties. The largest effect is observed after treatment with 32% glycerol decreasing the Young’s modulus and the ultimate tensile strength to 0.003 GPa and 1.8 MPa, respectively, whereas strain at failure increases to 29.6%. Moreover, glycerol treatment makes the surface of mycelium films hydrophilic and the hyphal matrix absorbing less water. Results show that mycelium films treated with 8% and 16–32% glycerol classify as polymer- and elastomer-like materials, respectively, while non-treated films and films treated with 1–4% glycerol classify as natural material. Thus, mycelium materials can cover a diversity of material families.
Highlights
IntroductionMycelium films are produced from liquid shaken cultures that have a Young’s modulus of 0.47 GPa, an ultimate tensile strength of 5.0 MPa and a strain at failure of 1.5%
Fungal mycelium is an emerging bio-based material
The liquid shaken cultures result in more reproducible materials and are easier to upscale and are preferred over static liquid cultures
Summary
Mycelium films are produced from liquid shaken cultures that have a Young’s modulus of 0.47 GPa, an ultimate tensile strength of 5.0 MPa and a strain at failure of 1.5%. The largest effect is observed after treatment with 32% glycerol decreasing the Young’s modulus and the ultimate tensile strength to 0.003 GPa and 1.8 MPa, respectively, whereas strain at failure increases to 29.6%. The chitin-glucan materials from Agaricus bisporus mushrooms are characterised by Young’s modulus (E) and ultimate tensile strength (σ) of approximately 7 GPa and 100–200 MPa, respectively[9]. These mushroom derived materials are the most rigid and strongest fungal derived material to date. Glycerol increases elasticity, reduces ultimate tensile strength and increases strain at failure of crustacean chitin derived nanopapers[15]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
