Fundamentals of phase-only liquid crystal on silicon (LCOS) devices

Abstract

This paper describes the fundamentals of phase-only liquid crystal on silicon (LCOS) technology, which have not been previously discussed in detail. This technology is widely utilized in high efficiency applications for real-time holography and diffractive optics. The paper begins with a brief introduction on the developmental trajectory of phase-only LCOS technology, followed by the correct selection of liquid crystal (LC) materials and corresponding electro-optic effects in such devices. Attention is focused on the essential requirements of the physical aspects of the LC layer as well as the indispensable parameters for the response time of the device. Furthermore, the basic functionalities embedded in the complementary metal oxide semiconductor (CMOS) silicon backplane for phase-only LCOS devices are illustrated, including two typical addressing schemes. Finally, the application of phase-only LCOS devices in real-time holography will be introduced in association with the use of cutting-edge computer-generated holograms. The capabilities and applications of phase-only liquid crystal on silicon (LCOS) technology are reviewed by scientists in China and the United Kingdom. Zichen Zhang and co-workers from Tsinghua University in Beijing and the University of Cambridge describe how an electronically controlled liquid-crystal pixel array on a silicon backplane can be useful for manipulating the phase of coherent light. Such LCOS phase modulators have many potential applications, including real-time holography, head-up displays, wavelength-selective switches and reconfigurable optical add-drop multiplexers. Commercial devices currently offer array sizes of up to about 1-inch diagonal with pixel pitches in the range 6–20 μm. However, the technology is still immature; the liquid-crystal materials and silicon control backplane need to be optimized in order to realize the potential of such devices.