Fundamental studies of Au contacts in MEMS RF switches

Abstract

Microelectromechanical systems (MEMS) radio frequency (RF) switches hold great promise in a myriad of commercial, aerospace, and military applications. However, there is little understanding of the factors determining the performance and reliability of these devices. Fundamental studies of hot-switched gold (Au) contacts were conducted using a micro/nanoadhesion apparatus as a switch simulator. Experiments were conducted in a well defined air environment under precisely controlled operating conditions. Fundamental properties were connected to performance with an emphasis on the effects of contact force and electric current on contact resistance (R), microadhesion, and reliability/durability. Electric current had the most profound effect on switch performance. Observations at low current (1–10 μA) include: (1) slightly higher R; (2) asperity creep; (3) high adhesion after rapid switching; (4) switch bouncing; and (5) reasonable durability. Conversely, observations at high current (1–10 mA) include: (1) slightly lower R; (2) melting; (3) no measurable adhesion; (4) less propensity for switch bouncing; (5) necking of contacts; and (6) poor reliability and durability due to switch shorting. Low current behavior was dominated by the propensity to form smooth surface contacts by hammering, which led to high van der Waals force. High current behavior was dominated by the formation of Au nanowires that bridge the contact during separation. Data suggest the presence of an adventitious film containing carbon and oxygen. Aging of the contacts in air was found to reduce adhesion.