Abstract
It is necessary to consider the TEM-mode, the higher TE and TM-mode and resonance phenomena in GIS to describe the propagation and detection characteristics for partial discharge measured with the UHF-method. Measurements on the non-reflection coaxial wave-guide simulating GIS were carried out with changing installation and shape of UHF sensor and wave-guide length. This paper describes the output characteristics of UHF sensor above cut-off frequencies, when reflection and resonance phenomena are taken into account. In the frequency region above the cut-off frequencies of the TE11 mode, the output characteristics of UHF sensor shows resonant by reason of the electromagnetic reflection of TE mode at the both ends of wave-guide. At the resonant frequency, the output characteristics of UHF sensor are different by wave-guide length, shape of sensor and sensor installation, distance from end of tank, angle at circumference. The resonant frequencies are function of tank-length and cut-off frequency of tank, and expressed with equation of cylindrical cavity resonator.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
