Abstract
Functionally graded, hard and wear-resistant Co–Cr–Mo alloy was coated on Ti–6Al–4V alloy with a metallurgically sound interface using Laser Engineering Net Shaping (LENS™). The addition of the Co–Cr–Mo alloy onto the surface of Ti–6Al–4V alloy significantly increased the surface hardness without any intermetallic phases in the transition region. A 100% Co–Cr–Mo transition from Ti–6Al–4V was difficult to produce due to cracking. However, using optimized LENS™ processing parameters, crack-free coatings containing up to 86% Co–Cr–Mo were deposited on Ti–6Al–4V alloy with excellent reproducibility. Human osteoblast cells were cultured to test in vitro biocompatibility of the coatings. Based on in vitro biocompatibility, increasing the Co–Cr–Mo concentration in the coating reduced the live cell numbers after 14 days of culture on the coating compared with base Ti–6Al–4V alloy. However, coated samples always showed better bone cell proliferation than 100% Co–Cr–Mo alloy. Producing near net shape components with graded compositions using LENS™ could potentially be a viable route for manufacturing unitized structures for metal-on-metal prosthetic devices to minimize the wear-induced osteolysis and aseptic loosening that are significant problems in current implant design.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
