Functionalized Nanoparticles for the Dispersion of Gas Hydrates in Slurry Flow.

Abstract

Gas hydrates are crystals that can form in oil and gas production. Their agglomeration in flowlines may disrupt the normal production. One current strategy of hydrate management is to inject an anti-agglomerant, a type of low-dosage hydrate inhibitor that prevents hydrate agglomeration. Concerns in the use of these chemicals include their toxicity, cost, and environmental impacts. In this study, we exploited functionalized nanoparticles in place of anti-agglomerants to produce hydrate slurry, with the potential benefit of nanoparticles to be more environmentally friendly and conveniently recyclable. We coated 256 nm spherical silica nanoparticles with different hydrophobicity and evaluated their performance for the hydrate dispersion at atmospheric and high pressure. Nanoparticles with moderate hydrophobicity stabilized oil-in-water (O/W) or water-in-oil (W/O) emulsions. Direct visualization of the cyclopentane hydrate formation from the nanoparticle-stabilized emulsions revealed different morphologies of hydrate particles depending on whether the nanoparticles prevented agglomeration. We also measured the apparent viscosity of a hydrate–nanoparticle mixture using a high-pressure rheometer. Nanoparticles with moderate hydrophobicity during hydrate formation slowed the viscosification, reduced the maximum viscosity, increased the water conversion, and ultimately helped to maintain a low steady-state viscosity. Increasing nanoparticle or salt concentrations also improved the gas hydrate dispersion. Our study demonstrated the great potential of using nanoparticles in preventing agglomeration of gas hydrates under realistic pipeline flow conditions.