Functionalization of calcium-deficient nanohydroxyapatite improves the mechanical properties of 3D printed biopolymer nanocomposites

Abstract

Agglomerations of nanoparticles in a polymer matrix can drastically reduce the mechanical properties of a polymer nanocomposite, especially its strength. The grafting of nanoparticle surfaces with suitable functional groups can provide improved dispersion and stronger interfacial bonding, improving the fracture resistance of the nanocomposite. In this study, calcium-deficient nanohydroxyapatite (nHA) particles were functionalized with an amino acid-based urethane methacrylate (lysine urethane methacrylate, LUM) and subsequently reacted with hydroxyethyl methacrylate. We mixed these functionalized nHA particles with resin, composed of methacrylated acrylated epoxidized soybean oil, methacrylated isosorbide, and triethylene glycol dimethacrylate, and 3D-printed nanocomposites using masked stereolithography. We hypothesized that the functionalized nanoparticles would enhance the mechanical performance of the 3D-printed nanocomposites due to the greater dispersion and stronger interface. Flexural, tensile, compression and Mode-I fracture toughness test specimens were fabricated using a mSLA printer and tested following ASTM standards. The LUM functionalization of nHA improved the dispersion and increased the viscosity of the uncured nanocomposite ink. The flexural fracture strength, yield strength, and mode-I fracture toughness values were increased by 10 %, 30 %, and 11 %, respectively. The LUM improved the strength and fracture toughness by providing a stronger, more stable interface, resisting debonding between the matrix and particles, allowing for greater plastic deformation.