Functional verification and performance tests of an ultra-low shock non-explosive actuator for hold-down and release mechanisms for space applications

Abstract

This paper addresses the functional verification and performance assessment of an ultra-low shock non-explosive actuator appropriate to space applications of hold-down and release mechanisms. To demonstrate that the design implementation and manufacturing methods have resulted in an engineering model conforming to the set of functional, performance and environmental requirements specified, a space qualification test campaign is typically required. To ensure the readiness of the engineering model and the adequacy of the mechanical and electrical ground support equipment required for the entire qualification test campaign, a set of functional verification procedures and performance characterization tests were systematized and undertaken before the mechanism qualification. A preload monitoring system was developed and calibrated, and the performance of the mechanism was evaluated through the estimation of the release time and the measurement of the self-generated shock. The main results and conclusions taken from these tests are presented and discussed here.