Abstract
AbstractShelf life at room temperature and curing behaviour at elevated temperature are studied for hot-curing accelerated epoxies (EP, diglycidylether of bisphenol A plus dicyandiamide (Dicy)) by FTIR-spectroscopy and modulated DSC. The accelerator is added either directly or with nano-zeolite filler to the EP. Due to the immobilisation of the accelerator in the pores of the nano-zeolite, the shelf life of this EP is 5 times longer than for the EP containing free accelerator. While the free accelerator acts during the whole heating step to curing temperature, the nano-zeolite does not release the accelerator before ca. 100 °C. As monitored by light microscopy, the released accelerator not only supports the curing but also stimulates the dissolution of the solid Dicy. As the result, network formation at 170 °C finishes within less than 25 minutes for the nano-filled EP.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
