Abstract
Aqueous zinc ion batteries have emerged as promising energy storage devices due to their high safety, cost-effectiveness, and environmental friendliness. However, the practical implementation of zinc ion batteries faces significant challenges associated with the poor surface stability of Zn metal anode, including dendrite growth, side reactions, and poor cycling stability. Herein, an eco-friendly cellulose layer is applied to the Zn metal anode by a scalable coating method for Zn/electrolyte interfacial engineering. The cellulose coating has multiple functions: physical passivation, reducing the resistive native oxide, enhancing wettability between the Zn metal and electrolyte, and facilitating the insertion and extraction of zinc ions during charge–discharge cycles at both room temperature and low temperature (−10 ℃). The cellulose-coated Zn metal anode (ZCL) also inhibits the formation of zinc dendrites, thereby reducing the risk of short circuits and capacity loss. As a result, the ZCL||ZCL symmetric cell achieved 1000 electrochemical cycles at 2 mA cm−2, which is more than eight times longer compared to that of a bare Zn symmetric cell. The electrochemical performance of the ZCL||MnO2 full cell was also found to be superior to that using the bare Zn anode electrode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.