Abstract
Understanding the function of individual screw elements in twin screw wet granulation has become an area of intense study but has yet to contemplate the interactions of adjacent elements. The present work examines the influence of conveying elements around the critical compression zone created by a kneading block. Granulated samples were prepared using nine different screw configurations with flight pitches of 20, 30 and 40mm and tested at two different degrees of channel fill utilizing a placebo formulation of 20wt% microcrystalline cellulose in α-lactose monohydrate. Samples were taken directly from the upstream and downstream conveying elements as well as the machine exit and analyzed for particle size, shape, apparent porosity and fracture strength. The results showed that the particle size, shape, and fracture strength of granules produced were significantly influenced by the pitch of downstream conveying elements while upstream conveying elements had no effect on exiting particles. Both zones were found to be insensitive to the degree of fill, though the variance in measurements decreased at higher fill. Similar results were observed when the formulation was adjusted to included 15% ibuprofen (though the ratio of lactose to microcrystalline cellulose remained constant).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.