Fumed silica/polyurethane nanocomposites: effect of silica concentration and its surface modification on rheology and mechanical properties

Abstract

The effects of nanosilica type and its content on microstructure, mechanical properties, and rheology of thermoplastic polyurethane (TPU) nanocomposites were investigated. Three different types of silica which included: unmodified (Si-Un) and commercially modified with octylsilane (Si-OS) and polydimethylsiloxane (Si-PDMS) with 5, 10, and 15 wt% of all fillers, were prepared by solution casting method. Scanning electron microscopy (SEM) showed that surface treatment of nanosilica with OS and PDMS reduced the aggregation of particles and improved their dispersion at microlevel. The effect of adding nanoparticles on microdomain morphology of TPU was studied by transmission electron microscopy (TEM), infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The results demonstrated a relatively good interaction between the hard and soft segments in the presence of treated nanosilica that hindered the crystallization of hard segments in TPU. Thermogravimetric analysis (TGA) and tensile test showed that nanocomposites with treated nanosilica have better thermal stability and mechanical properties. The dynamic rheological studies indicated that nanocomposites containing Si-OS and Si-PDMS (with better dispersion and higher interface between the soft and hard domains in TPU) have improved viscoelastic properties in comparison with nanocomposites with untreated silica. In this study, dynamic frequency sweep data were correlated by a generalized Maxwell model and found that elastic constants of TPU chains were improved in the presence of modified silica nanoparticles.