Abstract
We report on the fabrication of fully screen-printed bifacial large area (239 cm2) high-efficiency n-type Si solar cells with ion-implanted homogeneous boron emitter on the front side and carrier-selective tunnel oxide passivated contact (TOPCon) on the rear. Our phosphorus-doped poly-Si/SiOx passivated contact with SiNx capping layer gave excellent surface passivation with a very low recombination current density (J0_TOPCon) of ~1 fA/cm2 after a simulated firing treatment at ~770 °C without metallization. After screen-printed and fire-through metallization on n-TOPCon with ~13% metal coverage, metallized J0_TOPCon value increased to only ~5 fA/cm2. In addition, homogenous boron implanted emitter (~180 Ω/) passivated with ALD Al2O3 layer capped with PECVD SiNx/SiOx double-layer antireflection (DLAR) coating gave excellent passivation with emitter recombination current density of ~12 fA/cm2 prior to metallization. The industrial screen-printed, fire-through contacts with floating busbars on this boron emitter gave metallized emitter recombination current density of ~31 fA/cm2. This resulted in a low-cost industrial screen-printed n-type bifacial Si solar cell with 22.6% efficiency and 702 mV open-circuit voltage (Voc).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
