Fully automated synthesis of [ 18F]fluoromisonidazole using a conventional [ 18F]FDG module

Abstract

We developed a new fully automated method for the synthesis of [ 18F]fluoromisonidazole ([ 18F]FMISO) by modifying a commercial FDG synthesizer and its disposable fluid pathway. A three-step procedure was used to prepare the tosylate precursor, 1-(2′-nitro-1′-imidazolyl)-2- O-tetrahydrofuranyl-3- O-toluenesulfonylpropanediol. Using glycerol as the starting material, the precursor was synthesized with a yield of 21%. The optimal labeling conditions for the automated synthesis of [ 18F]FMISO was 10 mg of precursor in acetonitrile (2 ml heated at 105°C for 360 s, followed by heating at 75°C for 280 s and hydrolysis with 1 N HCl at 105°C for 300 s. Using 3.7 GBq of [ 18F]F − as a starting activity, [ 18F]FMISO was obtained with high end-of-synthesis (EOS) radiochemical yields of 58.5±3.5% for 60.0±5.2 min with high-performance liquid chromatography (HPLC) purification. When solid-phase purification steps were added, the EOS radiochemical yields were 54.5±2.8% (337±25 GBq/μmol) for 70.0±3.8 min ( n=10 for each group, decay-corrected). With a high starting radioactivity of 37.0 GBq, we obtained radiochemical yields of 54.4±2.9% and 52.8±4.2%, respectively ( n=3). The solid-phase purification removed unreacted [ 18F]fluoride and polar impurities before the HPLC procedure. Long-term tests showed a good stability of 98.2±1.5%. This new automated synthesis procedure combines high and reproducible yields with the advantage of using a disposable cassette system.