Full-Duplex Device-to-Device Cellular Networks: Power Control and Performance Analysis

Abstract

This paper investigates the benefits of incorporating full-duplex (FD) into an underlaid device-to-device (D2D) cellular network via centralized and distributed power control mechanisms. In the considered system, D2D users operate in an FD mode under the adverse effect of realistic residual self-interference, and their locations are modeled by a homogeneous spatial Poisson point process. By first considering a centralized power control scheme, we first formulate an optimization problem that maximizes the D2D link sum-rate under the constraint on minimum target signal-to-interference-plus-noise ratio (SINR) at each user. Since the problem is nonconvex, we propose a difference of convex based method to transform the problem into a sequence of convex subproblems which can be solved efficiently. The obtained solutions help to calculate the coverage probability of both cellular and D2D links, showing that a very high coverage probability of cellular link can be achieved while successfully supporting a large number of active D2D links. In the second part of the paper, we consider a distributed power control scheme where only the local channel state information of direct link between respective D2D users is needed. By utilizing the tools of stochastic geometry, we derive closed-form approximations of coverage probabilities for both cellular and D2D links. Specifically, we apply Laplace transforms and novel approximations that accurately approximate the expected values of fractional and exponential functions of random variables to obtain the distribution functions of SINRs at the base-station and D2D users in a closed form. By further taking the average over the distributions of cellular and D2D link distances, we then arrive at the closed-form approximations of cellular and D2D coverage probabilities. In addition, based on the approximation of D2D link coverage probability, an analytical expression for the D2D link sum-rate is also obtained, and it can be effectively calculated.