Abstract

The high-altitude environment, with reduced atmospheric pressure, low air and oxygen density as well as low temperature, significantly affects the characteristics of the tunnel fire. In this paper, six full-scale fire tests were conducted in a road tunnel at high altitude of 4100m. Three oil pools with areas of 0.8m2, 1.0m2 and 2.0m2 were employed as the fire sources. The Heat Release Rate (HRR), longitudinal and vertical temperature distributions, smoke propagation and back-layering were investigated in tests. The experimental results indicate that the Mass Loss Rate (MLR) at high altitude is lower than the theoretical one, and both the HRR growth rates and HRR growth rates per unit area increase with the pool size while the HRR per unit area seem to be independent of the pool size in this study. Additionally, the longitudinal dimensionless temperature with dimensionless distance were compared with the fire test conducted at normal altitude, arguing that the dimensionless temperature decays slowly at high altitude of 4100m than at normal altitude of 773m. The experimental results contribute to intensively understanding on fire characteristics of the tunnel at high altitude and to optimizing the fire detection and the emergency ventilation.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.