Front-mounted plow for smooth, non-furrow plowing with offsets

Uktam Umurzakov,Farmon Мамаtov,Sherzod Kurbаnov,Bakhadir Mirzaev,Javlon Raxmonov,Sunatullo Badalov,O Tursunov

doi:10.1051/e3sconf/202130403013

Abstract

The purpose of the study was the development of a front plow with angle clamps, which performs, smooth plowing. The authors have developed an improved front plow with angle clamps. The constructive scheme of the plow has been given. The basic principles and methods of classical mechanics, mathematical analysis and statistics were used in this study. Experimental studies have justified the processing depth within the limits of 10-12. 5 cm and the width of the capture of the angle is within the range of 7.5-10 cm. Economic tests have established that the developed front plow reliably performs the specified technological process and its performance indicators meet agrotechnical requirements. The use of a frontal plow for smooth, plowing provides a reduction in direct costs for processing 1 hectare of area compared to the technical means used by 26.8%.

Highlights

Today, energy and resource-efficient flat plowing technology is one of the most efficient, modern and promising technologies
In the traditional method of flat plowing, the angle cutter cuts the upper part of the soil plow and throws it to the bottom of the furrow
When the cutting depth of the soil plow angle is more than 12.5 cm, it is difficult to move the soil along the surface of the plow working in the closed zone, and as a result of its accumulation in front of it, the gravity of the plow increases

Summary

Introduction

Energy and resource-efficient flat plowing technology is one of the most efficient, modern and promising technologies. In the traditional method of flat plowing, the angle cutter cuts the upper part of the soil plow and throws it to the bottom of the furrow. The quality of plant remains is burying and the angle of rotation of the soil is increased. In this case, the angle cutter performs the technological process together with the plow body, ie in the direction of the trajectory of the soil plow, which rotates the main body. Angle cutters are aimed at performing two main functions in the process of technological work, ensuring the quality of good burial of plant debris and reducing the unevenness of the plowed field surface [9,10,11]. Research on the use of different types of angle cutters installed on traditional plows, the study of their performance and the justification and improvement of their parameters V.A

Objectives

Methods

Results

Conclusion