Abstract
Abstract We developed a front-end electronic system for large area photomultipliers. Connection to the PMT can be made by a single cable, useful to minimize cabling in a underwater detector. The cabling is done in the rear part of the crate to permit easy access to the electronic boards. A front-end board houses 8 channels each one is composed by a preamplifier and a leading edge discriminator. Up to 8 front-end boards can be housed in a crate, giving a modularity of 64 channels. A controller board is needed to setup and monitor the front-end parameters. This board implements also scalers and time to digital converters with time over threshold capability. A standard gigabit ethernet line is used for communication with the outside world. Details on the design and specification of the system is reported together some preliminary measurements done with the prototypes now under test in laboratory.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.