Abstract
ABSTRACTThis work aims at determining the constitutive model of four commercial water atomised low alloyed steel powders during cold compaction. Single-action experiments were performed, obtaining cylindrical specimens with different H/D ratios. The distribution of axial and radial stresses was investigated, and the relationships describing both the radial stress transmission coefficient and the flow stress as functions of the relative density were determined. The radial stress transmission coefficient also confirmed the hypothesised value of Poisson’s coefficient. The friction coefficient between the powder column and the die wall was determined, also highlighting the influence of the H/D ratio. Measuring the axial and radial strains due to spring-back, the axial and radial elastic moduli were determined, as functions of the relative density. The results obtained for the four materials were compared, also highlighting both differences and similarities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
