Frictional moment and wear modelling for incomplete spherical pistons in a spherical pump

Abstract

PurposeBecause of the specific structure and working mechanism, piston speed is only half of its shaft, which causes severally friction between piston and cylinder. Therefore, the main purpose of this paper is to investigate the friction and wear characteristics of the incomplete spherical piston in spherical pump comprehensively. Finally, to search the low-friction and wear-resistance structural pattern of the piston, and enhance the durability of spherical pump.Design/methodology/approachThe non-linear frictional moment model for incomplete spherical piston in spherical pump was derivated quantificationally. Parameter sensitivity analyses were conducted to find the low-friction structural pattern of the piston. The theoretical wear model of piston–cylinder pair is proposed as well.FindingsTo reduce the frictional moment between incomplete piston and cylinder, the optimised diameter ratio between piston pin and piston should be 0.12 based on the parameter sensitivity analyses. The maximum frictional moment is approximately 2.5 times of the minimum. The total efficiency should be considered synthetically based on the thickness of specific working medium.Originality/valueThe proposed non-linear frictional moment model offers the quantitative estimations. Parameter sensitivity analyses were conducted to find the low-friction structural pattern of the piston. The wear behaviours of the piston and cylinder were analysed to investigate the wear characteristics of the piston.