Abstract
This paper presents a variant of Friction Stir Welding (FSW) aiming to minimize or eliminate the root defects that still constitute a major constrain to a wider dissemination of FSW into industrial applications. The concept is based on the use of an external electrical energy source, delivering a high intensity current, passing through a thin layer of material between the back plate and the lower tip of the tool probe. Heat generated by Joule effect improves material viscoplasticity in this region, minimizing the root defects. The concept was validated by analytical and experimental analysis. For the later, a new dedicated tool was designed, manufactured and tested. Numerical simulations were performed to study the electrical current flow pattern and its effect on the material below the probe tip. The potential use of this variant was shown by reducing the size of the weld root defect, even for significant levels of lack of penetration, without affecting overall metallurgical characteristics of the welded joints.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
