Abstract
The present article is the first part in a two-part series in which crystallographic texture developed during friction stir processing of AA5182-O and AA6111-T4 is characterized and its impact on tensile properties explored. For the texture measurements, coupons were cut from the friction stir processed zone at selected orientations relative to the direction of tool translation. Texture was characterized with electron backscatter diffraction (EBSD) in a scanning electron microscope. Measurements were made at key positions along the coupon surfaces and texture differences between the two friction stir processed Al alloys are discussed in detail. Grain size variations were also measured in both the base and friction stir processed materials and subsequently compared. In part 2, a state-of-art digital image correlation technique is used to investigate tensile properties of both friction stir processed Al alloys. The impact of crystallographic texture on mechanical properties is also explored in this latter part.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.