Friction of diamond-like carbon films in different atmospheres

Abstract

Diamond-like carbon (DLC) films constitute a class of new materials with a wide range of compositions, properties, and performance. In particular, the tribological properties of these films are rather intriguing and can be strongly influenced by the test conditions and environment. In this paper, a series of model experiments are performed in high vacuum and with various added gases to elucidate the influence of different test environments on the tribological behavior of three DLC films. Specifically, the behavior of a hydrogen-free film produced by a cathodic arc process and two highly hydrogenated films produced by plasma-enhanced chemical-vapor deposition were studied. Flats and balls used in these experiments were coated with DLC and tested in a pin-on-disc machine under a load of 1 N and at constant rotational frequency. With a low background pressure, in the 10 −6 Pa range, the highly hydrogenated films exhibited a friction coefficient of less than 0.01, whereas the hydrogen-free film gave a friction coefficient of approximately 0.6. Adding oxygen or hydrogen to the experimental environment changed the friction to some extent. However, admission of water vapor into the test chamber caused large changes: the friction coefficient decreased drastically for the hydrogen-free DLC film, whereas it increased slightly for one of the highly hydrogenated films. These results indicate that water molecules play a prominent role in the frictional behavior of DLC films—most notably for hydrogen-free films but also for highly hydrogenated films.