Abstract
A theoretically based relationship for the Darcy–Weisbach friction factor $f$ for rough-bed open-channel flows is derived and discussed. The derivation procedure is based on the double averaging (in time and space) of the Navier–Stokes equation followed by repeated integration across the flow. The obtained relationship explicitly shows that the friction factor can be split into at least five additive components, due to: (i) viscous stress; (ii) turbulent stress; (iii) dispersive stress (which in turn can be subdivided into two parts, due to bed roughness and secondary currents); (iv) flow unsteadiness and non-uniformity; and (v) spatial heterogeneity of fluid stresses in a bed-parallel plane. These constitutive components account for the roughness geometry effect and highlight the significance of the turbulent and dispersive stresses in the near-bed region where their values are largest. To explore the potential of the proposed relationship, an extensive data set has been assembled by employing specially designed large-eddy simulations and laboratory experiments for a wide range of Reynolds numbers. Flows over self-affine rough boundaries, which are representative of natural and man-made surfaces, are considered. The data analysis focuses on the effects of roughness geometry (i.e. spectral slope in the bed elevation spectra), relative submergence of roughness elements and flow and roughness Reynolds numbers, all of which are found to be substantial. It is revealed that at sufficiently high Reynolds numbers the roughness-induced and secondary-currents-induced dispersive stresses may play significant roles in generating bed friction, complementing the dominant turbulent stress contribution.
Highlights
Accurate prediction of water levels in rough-bed open-channel flows (OCFs) is probably among the oldest hydraulic problems that still await proper solutions
The main attention in this analysis is paid to the identification of the effects of the roughness geometry (i.e. β), relative submergence H/∆, bulk Reynolds number Reb = UH/ν and the roughness Reynolds number ∆+ = u∗∆/ν, which relates to Reb as ∆+ = (u∗/U)(∆/H)Reb
It is shown that the friction factor can be split into at least five additive components, due to: (i) viscous stress; (ii) turbulent stress; (iii) dispersive stress; (iv) flow unsteadiness and non-uniformity; and (v) spatial heterogeneity of fluid stresses in a bed-parallel plane
Summary
Accurate prediction of water levels in rough-bed open-channel flows (OCFs) is probably among the oldest hydraulic problems that still await proper solutions. Despite significant efforts to advance this subject matter, hydraulic engineers continue to use empirical or semi-empirical approaches utilising Manning’s n = R2/3Sb1/2/U, Chezy’s C = U/(RSb)1/2, or the Darcy–Weisbach fcs = 8τ0cs/(ρU2) resistance coefficients (e.g. Graf & Altinakar 1998), where U is cross-sectionally averaged velocity; R is hydraulic radius, which for two-dimensional flow is equivalent to the mean flow depth; Sb is mean bed slope; ρ is fluid density; and τ0cs is bed shear stress averaged over the whole cross-section These resistance coefficients represent the combined effects of complex hydrodynamic processes in simple forms, making them convenient for practical applications based on cross-sectionally averaged hydraulic models. These distributions are consistent with the conventional definition of secondary currents as helical motions identifiable in time- and streamwise-averaged (z − 2ßz)/4ßz (a) 20
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have