Abstract
In the present study, pure oriented Fe2B with Cr addition were prepared. The friction and wear properties of oriented Fe2B with different Cr additions were investigated by optical microscopy, scanning electron microscopy and 3D laser scanning microscope. Results indicate that fracture toughness of the cross section is higher than that of the longitudinal section invariably with the same Cr addition. Both cross and longitudinal sections, the fracture toughness value increases from 1Cr to 2Cr and decreases from 2Cr to 3Cr. Friction coefficient and wear loss of cross section are lower than those of the longitudinal section under the same Cr addition. For the identical grain orientation, the friction coefficient and wear loss rise from 1Cr to 2Cr and then drop from 2Cr to 3Cr. 2Cr-C sample has the lowest friction coefficient and wear loss. On the contrary, the friction coefficient and wear loss of 3Cr-L sample are the highest. Wear mechanisms of Fe2B alloy are brittle rupture and abrasive wear.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
