Abstract
To improve the anti-wear properties of Mg alloys, Al-13Si, Al-15Si and Al-19Si coatings were prepared by supersonic particles deposition on the surface of ZM5 magnesium alloy. Micro-structure and anti-wear properties of the coatings were examined by digital micro-hardness tester, XRD, friction and abrasion testing machine, three-dimensional microscope and SEM. The results show that the wear-resistant layer and the magnesium substrate can be well integrated as mechanical bonding and the main wear failure mechanism of the three coatings is adhesive wear. Moreover, the micro-hardness of Al-19Si coating is 141.47HV0.05, much higher than Al-13Si coating (134.97HV0.05) and Al-15Si coating (136.02HV0.05). Besides, the anti-wear properties of Al-19Si coating is optimal, superior to Al-15Si coating and Al-13Si coating. All of those indicate that Al-19Si coating can provide the most excellent anti-wear protection for ZM5 magnesium alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.