Friction and Wear Characteristics of Bacterial Cellulose Modified by Microcellular Foaming Process

Abstract

Bacterial cellulose (BC) is a biodegradable, non-toxic, natural substance that can be obtained by culturing bacteria. It can be approached in various ways from physical, chemical, and biological points. BC nanoparticles have been applied as lubricating additives to improve the load capacity, anti-wear, and friction. The microcellular foaming process was created using a technology based on the saturation of the polymer by supercritical CO2 and rapid decompression. An increase in saturation pressure leads to an increase in the molecular potential energy of CO2, which can be more easily compressed into the cellulose matrix. Moreover, the high crystallinity and water content combination contribute to thermal stability. Specimen membranes produced by Komagataeibacter xylinus prepared with a thickness of 2 mm were saturated in supercritical condition, 10 MPa of CO2 for 4 h, and foamed at a temperature of 120 °C in a hot press. After the foaming process, we used dry ice to cool the BC. Before foaming, the friction coefficient continuously increased with the increase in cycles, and after foaming, a stable friction coefficient of 0.3 or less was secured despite the increase in the cycle. The microcellular foaming process significantly reduced and made BC’s coefficient of friction stable.