Abstract
The friction and wear performances of Si3N4 ceramics sliding against bearing steel and to find optimal operating condition against M50 bearing steel couples under high vacuum surroundings were investigated. The tests were studied on the ball-disk machine under different loads and steady sliding velocity. The worn surfaces of tested samples were examined using optical microscope，SEM and XPS. The results showed that the friction coefficient of Si3N4 was decided by the applied load, the critical load of Si3N4’ friction coefficient was 10N applied load; The critical load of Si3N4’ specific wear rate was 5N applied load, the specific wear rate of Si3N4 drop rapidly as the applied load exceeded the critical load; The dominant wear mechanisms of Si3N4 ceramics were adhesion wear, brittle facture and furrow wear in vacuum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
