Abstract
The influence of functionally graded TiN coating on fretting fatigue behavior of titanium alloy was investigated. The coating was deposited using an ion beam assisted deposition technique. TiN film was fabricated by an electron beam evaporation of titanium and simultaneous nitrogen ion bombardment. An acceleration voltage of ion beam was set at 0.2 or 2.0 keV. The functionally graded layer was fabricated by varying the mixing ratio of nitrogen/argon ion beam. The mixed layer became thicker by an increase in acceleration voltage. The adhesive strength and wear resistance were improved with an increase in the acceleration voltage. Moreover, they were significantly improved by inserting the functionally graded layer. The fretting fatigue tests were conducted using a four-point bending fatigue testing machine. The fretting fatigue life of specimen coated with monolayer TiN film was longer than that of uncoated specimen. The TiN coating with functionally graded layer was the most effective to improve the fretting fatigue life.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.