Abstract

The frequency of an InGaAsP distributed-feedback (DFB) laser was locked to the 2p/sub 10/-3d/sub 5/ transition of argon atoms at 1.2960 mu m using the optogalvanic signal obtained from a commercial miniature glow lamp. At a discharge current of 500 mu A, the signal-to-noise ratio of the optogalvanic signal corresponding to the Ar transition was about 18 dB. The peak-to-peak width of the first derivative signal was 650 MHz. The slope of the signal was 0.32 mu V/MHz near the center of the transition. By using the linear portion of the first-derivative signal, the laser frequency was locked to the Ar 2p/sub 10/-3d/sub 5/ transition. The peak-to-peak frequency fluctuations in the free-running condition were estimated to be 650 MHz, which is mainly due to laser temperature fluctuations. When the servo-loop was closed, the frequency stability was improved to better than 13 MHz.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.