Abstract
<span>A frequency reconfigurable microstrip transformed rectangular patch antenna consisting of two slots able to radiate in S-band and C-band is proposed. Spectrum occupancy is first analyzed using the data from literature and internet sources and hence spectrum holes are identified. A rectangular radiating patch is then designed for 5.8 GHz resonant frequency. A coaxial feed is used in the bottom by a suitable feed point. Two slots at an angle of +45 degree are made at the two corners. The electrical length of the patch is changed by using two varactor diodes in the slots. The varactors enable frequency reconfiguration in the band of frequencies that are unused or the spectral occupancy is very less. The return loss, voltage standing wave ratio (VSWR), and 2D-radiation patterns are analyzed for various values of the capacitances. high-frequency structure simulator (HFSS) is used for simulation. FR4 substrate which is economical, is used with height, h=1.6 mm, width W=25.33 mm, and length L=21.34 mm. On the substrate the rectangular patch is of width 15.73 mm and length 11.74 mm. The return loss and radiation patterns for different values of capacitances is presented. The tunability ratio obtained is 1.93. The results obtained agree with the standards.</span>
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Electrical and Computer Engineering (IJECE)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
