Abstract
We report efficient frequency downconversion of a continuous-wave low-power Raman laser using intracavity difference frequency mixing in a periodically poled lithium niobate (PPLN)-adopted optical parametric oscillator (OPO). The Raman laser was obtained using a 1060-nm fiber laser and 137-m passive fiber. Its central wavelength was fixed at 1111 nm with the power ranging from 320 mW to 5.984 W. The 1060- and 1111-nm pump beams were incident into the OPO at the same time. The high-power 1060-nm pump beam built parametric oscillation first, and the difference frequency generation (DFG) occurred between the low-power Raman laser and intracavity signal laser. The PPLN temperature was properly controlled at 45°C to ensure both the OPO and DFG processes synchronously satisfy phase matching conditions. Benefiting from intracavity high signal power, the Raman laser was successfully converted to the 3560-nm midinfrared radiation under every investigated pump power level. The maximum 3560-nm idler power reached 1.026 W, indicating a 17.4% pump-to-idler slope efficiency and about 15% optical-to-optical conversion efficiency. The comparative experiments also verified that the phase matching conditions were satisfied maximally at 45°C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.