Frequency-doubling effect in acoustic reflection by a nonlinear, architected rotating-square metasurface.

Abstract

Listen

Translate article

Nonlinear acoustic metamaterials offer the potential to enhance wave control opportunities beyond those already demonstrated via dispersion engineering in linear metamaterials. Managing the nonlinearities of a dynamic elastic system, however, remains a challenge, and the need now exists for new strategies to model and design these wave nonlinearities. Inspired by recent research on soft architected rotating-square structures, we propose herein a design for a nonlinear elastic metasurface with the capability to achieve nonlinear acoustic wave reflection control. The designed metasurface is composed of a single layer of rotating squares connected to thin and highly deformable ligaments placed between a rigid plate and a wall. It is shown that during the process of reflection at normal incidence, most of the incoming fundamental wave energy can be converted into the second harmonic wave. A conversion coefficient of approximately 0.8 towards the second harmonic is derived with a reflection coefficient of <0.05 at the incoming fundamental frequency. The theoretical results obtained using the harmonic balance method for a monochromatic pump source are confirmed by time-domain simulations for wave packets. The reported design of a nonlinear acoustic metasurface can be extended to a large family of architected structures, thus opening new avenues for realistic metasurface designs that provide for nonlinear or amplitude-dependent wave tailoring.